OEM Manufacturer Pq Type Transformer or Inverter or SMPS Transformer for Power Supply Home Appliance
abide by the contract”, conforms towards the market requirement, joins during the market competition by its good quality likewise as provides additional comprehensive and great services for customers to let them turn out to be big winner. The pursue of your enterprise, is the clients’ fulfillment for OEM Manufacturer Pq Type Transformer or Inverter or SMPS Transformer for Power Supply Home Appliance, Welcome to go to us at any time for company romance established.
abide by the contract”, conforms towards the market requirement, joins during the market competition by its good quality likewise as provides additional comprehensive and great services for customers to let them turn out to be big winner. The pursue of your enterprise, is the clients’ fulfillment for China Electric Transformer and Flyback Transformer, With the technology as the core, develop and produce high-quality goods according to the diverse needs of the market. With this concept,the company will continue to develop products with high added values and continuously improve solutions,and will give many customers with the best solutions and services!
There are two basic types of DC transformers, namely, a DC-DC converter whose output voltage is regulated and a “DC transformer” whose output voltage is adjusted with the input.
The basic requirements:
(1) Realize the electrical isolation of input and output voltage and the proportional relationship between input and output, and can realize multiple output;
(2) Use transformer leakage inductance for energy transmission, no energy consumption, conversion efficiency of 1, and high power density;
(3) The output does not need filter inductance, which can greatly reduce the volume and weight of the output filter, with good dynamic performance and fast transient response;
(4) The system frequency bandwidth can transmit voltage without distortion;
(5) Open loop control is adopted, the control circuit is simple, it is easy to realize soft switching, and the switching frequency can be further improved;
(6) High reliability, small electromagnetic interference to power supply and electrical equipment.
CONFIGURATION & DIMENSIONS:(Unit: mm)
NOTE
1.1 FIXING TAPE FOR CORE: 0.025×6.5mmx3.0Ts;
1.2 PIN2.3,6,7, REMOVE;
1.3
DIMENSIONS & OUTLINE DRAWING
NOTE:
A. Vacuum Varnishing;
B. Net Weight: 13.2g ±10% /pcs。
C. ( )=TEELON TUBE
WINDING SPEC
NO. |
MARGIN |
TERMINAL |
WIRE | TURNS | WINDING METHOD | INSULATIONI BETWEEN COILS | ||
1-4 | 5-8 | START | END | |||||
W1 |
(4) |
(5) | UEW-H Φ0.2 | 280T | SOLENOID | 0.05*13.5mm/2T | ||
W2 |
(1) |
(8) | UEW-H Φ0.5 | 20T | SOLENOID | 0.05*13.5mm/2T |
ENVIRONMENTAL TEST
NO | TITLE | CONDITION | REMARKS |
1 | HIGH TEMPERATURE | 120℃±2.0℃ 96Hrs | Must meet the requirements ofNo.4-4 and 4-5. |
2 | LOW TEMPERATURE | -25℃±2.0℃ 96Hrs | |
3 | LOW TEMPERATURE | +40℃±5;96±3%R.H; 120Hrs | |
4 | THERMAL SHOCK | -25℃±2.0℃ 30Minutes;Room Temp 10Minutes;105℃±2.0℃ 30Minutes; 5 CyclesRoom Temp 10Minutes; | Must meet the requirements ofNo.4-4, 4-5 and must operateproperly. |
5 | 120℃ | Must operate properly | |
6 | -25℃-120℃ | ||
7 | -30℃~+90℃ |
PHYSICAL TEST
NO | TITLE | CONDITION |
1 | TERMINAL STRENGTH | The terminal shall be not remarkably damage by pulling and pushing of 1.02kg for 30± 5 seconds in the axis directions. (JIS C 0051) |
2 | VIBRATIONRESISTANCE | Appearance and structure shall be no abnormality after vibrating at the frequency varying uniformly between the approximate limits and 10 and 55 and 10 Hz at 1 minute and the amplitude of 1.5 mm for 2hrs in 3 mutually perpendicular directions. (JIS C 0040) |
3 | SOLDERABILITY | Solder shall be attached uniformly around the dipped portion after dipping into solder at 235±5℃ for 3.0±0.5 seconds。(JIS C 0050) |
4 | SOLDER HEATRESISTANCE | No remarkable damage after dipping into solder at 260±5℃ for10±1seconds up to 1.0-1.5mm from the attachment surface. (JIS C 0050) |
Application
Widely used in the field of controlling switch power supply, LCD power supply, high-power UPS inverter power supply, computer power supply, energy-saving lamps
Kindly Reminder
1. About the SAMPLE. Please provide specification or sample materials, we will evaluate your product, design and produce samples.
2. About PRICE. Transformers are customized products. Due to the difference in material and design, even if the model is the same,the price is different. The price also depends on the complexity of the parameters and the number of orders.
3. Regarding SHIPPING. SamplE within 5-7 days; mass production within 10 to 20 days.
4. Packaging, logistics, according to the specific requirements of the purchase and sale contract.
Packing & Delivery
FAQ
abide by the contract”, conforms towards the market requirement, joins during the market competition by its good quality likewise as provides additional comprehensive and great services for customers to let them turn out to be big winner. The pursue of your enterprise, is the clients’ fulfillment for OEM Manufacturer Pq Type Transformer or Inverter or SMPS Transformer for Power Supply Home Appliance, Welcome to go to us at any time for company romance established.
OEM Manufacturer China Electric Transformer and Flyback Transformer, With the technology as the core, develop and produce high-quality goods according to the diverse needs of the market. With this concept,the company will continue to develop products with high added values and continuously improve solutions,and will give many customers with the best solutions and services!