New Fashion Design for Transformer 12 Volt 5 Amp - 220 To 110 High Frequency Flyback PQ32 Ferrite Core PFC Inductor – Sanhe
New Fashion Design for Transformer 12 Volt 5 Amp - 220 To 110 High Frequency Flyback PQ32 Ferrite Core PFC Inductor – Sanhe Detail:
Introduction
It is mainly used in the primary input part of LLC resonant circuit. As the power of the laser power supply is rather large, it is necessary to modify power factor to synchronize curves of voltage input and current input as much as possible and to reduce the loss caused by reactive current in circuits. Working efficiency of the power supply also has been improved. Because the inductor works in high frequency condition, interferences such as electromagnetic radiation easily appear. It is necessary to take shielding measures to avoid excess of EMC by standard.
Parameters
NO. | ITEMS | TEST PIN | SPECIFICATION | TEST CONDITIONS | |
1 | Inductance | 6-7 | 300u H±5% | 10KHz,0.3Vrms | |
2 | DCR | 6-7 | 155mΩ MAX | AT 25℃ | |
3 | HI-POT | COIL-CORE | No Break | 1KV/5mA/60s |
Dimensions:(Unit: mm)& Diagram
Features
1. PQ structure with side-assembled core
2. LITZ wires are used to reduce skin effect and temperature rise
3. Epoxy is used in the butt surface of iron core to eliminate noise
4. Cross-shaped copper foil outside the ferrite core for shielding
Advantages
1. The BOBBIN structure with iron core entered from the side saves space for power board
2. The iron core with PQ32 structure and copper foil outside for shielding ensures good EMC indicators
3. Sufficient margin for DC superposition index and well performance in anti-saturation
4. Good effect in temperature rise
Certificates
Our Customers
Company Profile
Product detail pictures:
Related Product Guide:
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of New Fashion Design for Transformer 12 Volt 5 Amp - 220 To 110 High Frequency Flyback PQ32 Ferrite Core PFC Inductor – Sanhe, The product will supply to all over the world, such as: Gambia, El Salvador, Iceland, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!
By Geraldine from Casablanca - 2017.09.30 16:36
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Rachel from Barcelona - 2018.11.28 16:25