Manufactur standard Converter 220 To 110 - High Frequency UT Series Power Common Mode Inductor For DVD – Sanhe
Manufactur standard Converter 220 To 110 - High Frequency UT Series Power Common Mode Inductor For DVD – Sanhe Detail:
Introduction
It is a UT type common mode inductor, which is mainly used for the voltage input end of DVD power supply. It can eliminate common mode interference and optimize EMC parameters. With a closed-type iron core of high permeability, LCL-20-068 performs well in high-frequency impedance and is usually suitable for occasions where the working current is not very large due to its limited winding space.
Parameters
| NO. | ITEMS | TEST PIN | SPECIFICATION | TEST CONDITIONS | |
| 1 | Inductance | L（1-2） | 2.9mH MIN | 1.0KHz,1.0Vrms | |
| L（3-4） | |||||
| 2 | Inductance Deflection | I L1-L2 I | 500uH MAX | 1.0KHz,1.0Vrms | |
| 3 | DCR | R（1-2） | 0.3Ω MAX | AT 20℃ | |
| R（3-4） | |||||
Dimensions:（Unit: mm）& Diagram
Features
1. UT20 structure and double-slot roller BOBBIN
2. Ferrite core of high permeability
3. Two windings are wound symmetrically after the magnetic core is pre-installed
4. Wound by special automatic winding equipment
Advantages
1. Roller BOBBIN structure is suitable for automatic equipment winding, which greatly improves the production efficiency
2. With closed high-conductivity core, the inductance is more stable than non-closed structures such as UU type
3. Compact structure, consistent in size, and easy to assemble
4. Perform well in impedance
Video
Your browser does not support video tags.
Certificates
Our Customers
Company Profile
Product detail pictures:
Related Product Guide:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Manufactur standard Converter 220 To 110 - High Frequency UT Series Power Common Mode Inductor For DVD – Sanhe, The product will supply to all over the world, such as: Bolivia, Slovenia, Lisbon, So far our merchandise have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have now 13years experienced sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to provide our customers with high quality items and excellent service.
By Priscilla from Norway - 2017.02.18 15:54
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Megan from Swiss - 2017.08.16 13:39
